Product Enquiry

Coiled Tubing Tools
Flow Control Tools
Pressure Control

You have 0 products in your enquiry. Use the 'Add' buttons to add any products you wish into your enquiry. To send your enquiry click on the 'Send Enquiry' button.

BDAF / BDHF Top No-Go Lock Mandrel


The BDAF and BDHF Lock Mandrel assemblies are top no-go style locks. With a no-go shoulder located just below the locking dogs, these locks will land and lock flow control devices in the BDAF and BDHF type top no-go seating nipples

BDAR / BDHR Bottom No-Go Lock Mandrel


The BDAR and BDHR Lock Mandrel assemblies are bottom no-go style locks. These locks have a no-go shoulder either on the packing mandrel or, in cases where packing is not required, it is located on the flow control accessory. These locks will land and lock flow control devices only in the BDAR and BDHR bottom no-go seating nipples

BDDB6 Top No-Go Lock Mandrel


The BDDB6 series Lock Mandrel is a top no-go locking device designed to be landed and locked in a BDDB6 Landing Nipple and BDB6 series hydraulic safety valve landing nipples

BDQ / BDQB No-Go Lock


The BDQ Lock Mandrel is a top no go lock used to locate and install flow controls and compatible with BDQ Landing Nipple profile. The BDQB Lock Mandrel is a bottom no-go version of the BDQ Lock Mandrel

BDR / BDRN Lock Mandrels


The BDR Lock Mandrel is a downhole device, run and retrieved on slickline in which it is placed and anchored to the BDR or BDRN Landing Nipple within the tubing string to provide a setting point for flow-control equipment such as valves, chokes and plugs

BDRP Top No-Go Lock Mandrels


The BDRP Lock Mandrel is a top no go lock mandrel which is designed to land and lock Sub-Surface Safety Valve (SSSV) in a BDRP Landing Nipple profile

BDRPT No-Go Lock Mandrels


The BDRPT No-Go Lock Mandrel locates on top of the nippleís polished bore; therefore, there are no secondary restrictions normally associated with bottom no- go profiles. This feature makes BDRPT systems well suited for high-pressure, high volume, large-bore completions

BDRQ Bottom No-Go Lock Mandrel


The BDRQ Lock Mandrel is a bottom no go lock mandrel which is designed to land and lock Sub-Surface Safety Valve (SSSV) in an BDRQ landing nipple profile

BDX / BDXN Lock Mandrels


The BDX Lock Mandrel is a downhole device, run and retrieved on slickline in which it is placed and anchored to the BDX or BDXN Landing Nipple within the tubing string to pro- vide a setting point for flow-control equipment such as valves, chokes and plugs

BDAF / BDHF Top No-Go Seating Nipple


The BDWS Top No-Go Seating Nipple provides for the location of various wireline flow control devices in the production string. The nipple's no-go shoulder is used to help locate and set the Lock, but, it is unloaded once the setting operation is completed.

BDAR / BDHR Bottom No-Go Seating Nipple


The BDWS Bottom No-Go Seating Nipple provides for the location of various wireline flow control devices in the production string. The nipple's no-go shoulder is used to help locate and set the lock, but, it is unloaded once the setting operation is completed

BDB6H Safety Valve Landing Nipple


The BDB6H Safety Valve Landing Nipple is designed for pressure containment as part of the tubing string. These nipples have a locking recess and a hydraulic communication port located between the two polished bores. The nipples feature an integral control line connection port

BDR / BDRN Landing Nipples


The BDR / BDRN Landing Nipple is a downhole component, fabricated as a short section of heavy wall tubular with a machined internal surface that provides a seal area and a locking profile

BDRP Top No-Go Landing Nipples


The BDRP Top No-Go Landing Nipples are designed to accept surface controlled, wireline-retrievable safety valves. An internal profile has been machined in these nipples to allow a lock mandrel/safety valve to be landed and locked in place

BDRPT No-Go Landing Nipple System


The BDRPT No-Go Landing Nipple System provides a means of running a series of positive location landing nipples in a tubing string with minimum restriction. BDRPT No-Go Landing Nipples are designed to accept the BDPRT Lock Mandrels with a rated working pressure of 10,000 psi (690 bar) differential from above and below

BDRQ Bottom No-Go Landing Nipples


The BDRQ Bottom No-Go Landing Nipples are designed to accept surface controlled, wireline-retrievable safety valves. An internal profile has been machined in these nipples to allow a lock mandrel/safety valve to be landed and locked in place

BDX / BDXN Landing Nipples


The BDX / BDXN Landing Nipple is a downhole component, fabricated as a short section of heavy wall tubular with a machined internal surface that provides a seal area and a locking profile. The Landing Nipples are included in most completions at a predetermined intervals to enable the installation of flow-control devices, such as Plugs and Chokes

BDPRR / BDPRN Plug Assemblies


The BDPRR / BDPRN Plug Assemblies are run and pulled on wireline and are designed to plug the tubing for testing packer leakage, removing wellhead, testing tubing and separation zone during remedial workovers

BDPXX / BDPXN Plug Assemblies


The BDPXX / BDPXN Plug Assemblies are run and pulled on wire-line and are designed to plug the tubing for testing packer leakage, re- moving wellhead, testing tubing and separation zone during remedial workovers

Knock-Out Plugs


With the BDWS Knock-Out Plug installed, the packer serves as a temporary bridge plug, allowing pressure work to be performed above the packer. The knock-out plug is removed with the production tube as the seal assembly is landed and falls to the bottom of the well

Pump Open Plugs


The BDWS Pump Open Plug was designed to enable plugged wells to be brought back into production more safely and economically than when using conventional wireline plugs

BDPRS Pulling Tools


The BDPRS Pulling Tools are wireline service tools that are used to retrieve sub-surface devices with internal fishing necks. The BDPRS pulling tool consists of a fishing neck with threaded pin connection on the top, an inner mandrel, a collet, a collet core and either a core spring (BDPRS-2 and BDPRS-3) or a ratchet assembly (BDPRS)

BDZ6 Running Tools


The BDZ6 Running Tools are used to install BDDB Locks and attached subsurface control devices in 4" to 7" no-go landing nipples with BDDB profiles

BDB6 Surface Control Subsurface Safety Valve


The BDB6 series Surface Control Subsurface Safety Valve is a versatile wireline retrievable subsurface safety valve with a straight through bore and internal equalizing feature

BDRK Latches


The 1-1/2 inch BDRK Latches are designed for installation in G-type pocket profile side pocket mandrels

BDRO, BDRD / BDRA Sliding Sleeves


The BDWS Sliding Sleeve is comprised of full-opening devices with an inner sleeve that can be opened or closed, using standard wireline methods to provide communication between the tubing and the tubing/casing annulus

BDXD / BDRD Non-Elastomeric Sliding Side Sleeve


The BDXD / BDRD Non-Elastomeric Sliding Side Sleeve is a full opening device with an inner sleeve that can be opened or closed using standard slickline methods. This sleeve enables communication between the tubing and the tubing/casing annulus for circulation or selective-zone production

BDXO, BDXD / BDXA Sliding Sleeves


The BDWS Sliding Sleeve is comprised of full-opening devices with an inner sleeve that can be opened or closed, using standard wireline methods to provide communication between the tubing and the tubing/casing annulus. They feature the BDX nipple profile above the inner sliding sleeve and a polished area below as an integral part of the assembly

HydroSet Subs


The BDWS HydroSet Sub works as a blanking device for a tubing string, it allows for pressure to build-up to a pre-determined value before the ball seat shifts open, allowing the seated ball to be expanded out the bottom, leaving behind a full bore opening through the tool

5-Flanged Manifolds


The BDWS 5-Flanged Manifold is manufactured from alloy steel. It is designed to provide a means to divert flow to various flow lines

Half Moon Sheaves


The BDWS Half Moon Sheave also known as an Arch Sheave is designed specifically to be used for large sheave diameter application. Used to run control line or encapsulated ESP cable/line. The sheave groove can be designed to match the line size

Dual Ram Hydraulic Wireline BOP (Compact)


The BDWS Hydraulic Wireline Valve (or BOP) is a hydraulic compact wireline valve construction; designed specifically to be used as Single, Dual, Triple or Quad Ram; for Slickline and Braided Line operations

Dual RAM Hydraulic Wireline BOP (Monobloc)


The BDWS Hydraulic Wireline Valve (or BOP) is a hydraulic compact wireline valve construction; designed specifically to be used as Single, Dual, Triple or Quad Ram; for Slickline and Braided Line operations

Dual Ram Manual Wireline BOP


The BDWS Manual Wireline Valve (or BOP) is a compact wireline valve construction; designed specifically to be used as Single or Dual; for Slickline and Braided Line operations

Quad Ram Hydraulic Coiled Tubing Top (Monobloc)


The BDWS Hydraulic Coiled Tubing (or BOP) is a hydraulic CT valve construction; designed specifically to be used as Dual, Triple or Quad Ram; for coiled tubing operations

Quad Ram Hydraulic Wireline BOP (Compact)


The BDWS Hydraulic Wireline Valve (or BOP) is a hydraulic compact wireline valve construction; designed specifically to be used as Single, Dual, Triple or Quad Ram; for Slickline and Braided Line operations

Single Ram Hydraulic Wireline BOP (Compact)


The BDWS Hydraulic Wireline Valve (or BOP) is a hydraulic compact wireline valve construction; designed specifically to be used as Single, Dual, Triple or Quad Ram; for Slickline and Braided Line operations

Single Ram Manual Wireline BOP


The BDWS Manual Wireline Valve (or BOP) is a compact wireline valve construction; designed specifically to be used as Single or Dual; for Slickline and Braided Line operations

Single Shear Ram Hydraulic Wireline BOP (Monobloc)


The BDWS Hydraulic Wireline Valve (or BOP) is a compact wireline valve construction; designed specifically to be used as Single or Dual; for Slickline and Braided Line operations

Triple Ram Hydraulic Coiled Tubing BOP (Monobloc)


The BDWS Hydraulic Coiled Tubing (or BOP) is a hydraulic CT valve construction; designed specifically to be used as Dual, Triple or Quad Ram; for coiled tubing operations

Triple Ram Hydraulic Wireline BOP (Compact)


The BDWS Hydraulic Wireline Valve (or BOP) is a hydraulic compact wireline valve construction; designed specifically to be used as Single, Dual, Triple or Quad Ram; for Slickline and Braided Line operations

Ball Check Union Valve


The BDWS Ball Check Union is designed to seal off well pressure in the event of the wireline parting form the toolstring

Valve Check Union


The BDWS Valve Check Union is designed to seal off well pressure in the event of the wireline parting form the toolstring

Chemical Injection Sub


The BDWS Chemical Injection Sub is designed to allow the injection of either a de-icing agent (i.e. Methanol or Glycol) or an inhibitor to prevent H2S/CO2 corrosion

Quick Test Sub


When performing wireline operations, it is often necessary to make tool changes to the toolstring. To gain access, the lubricator is separated from the wireline valve by breaking out a quick union. Before the toolstring can be redeployed, it is good practise to test the integrity of the quick union o-ring

Crossover Adapters


The BDWS Crossover Adapter is designed to safely connect lubricator/riser sections or other equipment with different end connections.

Grease Injection Head Cable Cutter


The BDWS GIH Cable Cutter is positioned immediately below the Grease Injection Head and above the Tool Catcher

Grease Injection Heads


The BDWS Grease Injection Head is designed to perform a sealing function on braided line operations

Hay Pulley / Floor Block


The BDWS Hay Pulley/Floor Block is used to control the route of the wireline or cable from the winch to the Stuffing Box or Grease Injection Head sheave

Integral Lubricators


The BDWS Integral Lubricator is manufactured from alloy steel and available from 2 feet to 24 feet in length

Lubricator Dollies


The BDWS Lubricator Dolly is designed for easy transportation

Lubricator Lifting Clamps


The BDWS Lubricator Lifting Clamp is designed for lifting the Lubricator/ Riser. The Lubricator Lifting Clamp can be designed and load tested to customer requirement

Threaded Lubricator


The BDWS Threaded Lubricator is manufactured from alloy steel and available from 2 feet to 12 feet in length

Flanged Risers


The BDWS Flanged Riser is manufactured from alloy steel and available up to 20 feet in length

Lifting Caps


The BDWS Lifting Cap is a safe and efficient way if lifting the BOP onto the wellhead. It gives the operator a straight vertical lift, which is essential when connecting quick unions

Measuring Heads


The Measuring Head operates with a simple wrap around system, controlled with the use of pressure wheels. The Measuring Head measures the wireline as it enters the well giving a depth measurement at surface via a vendor root counter

Pressure De-Boosters


The BDWS Pressure De-Booster allows reduction in the high pressures transmitted through hose or tubing from the service truck pump pressure manifold to remotely located readout instrumentation by 75%

Integral Pump-In Tees


The BDWS Integral Pump-In Tee is designed to provide convenient access for pumping fluids into the well or bleeding off lubricator pressure. They are available with several variations of side outlet ports

Pump-In Flanged Cross


The BDWS Pump-In Flanged Cross is designed to provide convenient access for pumping fluids into the well or bleeding off lubricator pressure. They are available with several variations of side outlet ports

Pump-In Y Cross


The BDWS Pump-In Y Cross is designed to provide convenient access for pumping fluids into the well or bleeding off lubricator pressure. The special Y inlet is designed to minimize erosion or turbulence when pumping high pumping volume or fluid into the well

Side Door Strippers


The Side Door Stripper (sometimes referred to as a packoff or stuffing box) provides the primary operational seal between pressurized well bore fluids and the surface environment

Tandem Side Door Strippers


The Tandem Side Door Stripper (sometimes referred to as a packoff or stuffing box) provides the primary operational seal between pressurized well bore fluids and the surface environment

Flanged Spool Adapters


The BDWS Flanged Spool Adapter is manufactured from alloy steel and available from 1-13/16" to 21-1/4"ID

Hydraulic Stuffing Box


The BDWS Hydraulic Stuffing Box is used when it is necessary to perform wireline work under well pressure. The Stuffing Box is equipped with a sheave. The sheave assembly allows the wireline to be guided in its travels from the wireline unit into and through the Stuffing Box body assembly

Hydraulic Swabbing Stuffing Box


The BDWS Hydraulic Swabbing Stuffing Box is designed to perform sealing function on braided cable with hydraulic pressure

Liquid Seal Hydraulic Stuffing Box


The BDWS Liquid Seal Hydraulic Stuffing Box is designed to seal and contain well pressure around stationery or moving wire during slickline operations

Test Caps & Test Plugs


The BDWS Test Cap & Test Plug is available for all sizes of quick union connections to assist with the testing of pressure control equipment

Hydraulic Tool Catcher


The BDWS Hydraulic Tool Catcher is designed to catch the rope socket of a wireline toolstring. It prevents toolstring from accidentally pulling out of the rope socket and falling into the well

Hydraulic Tool Trap


The BDWS Hydraulic Tool Trap is designed to stop wireline tools from falling back down the well should the wireline accidentally break at the Rope Socket when pulling back into the lubricator

Manual Tool Trap


The BDWS Manual Tool Trap is designed to stop wireline tools from falling back down the well should the wireline accidentally break at the Rope Socket when pulling back into the lubricator

Toolstring Clamp


The BDWS Toolstring Clamp is designed and manufactured to locate around standard toolstring fishing necks

Torsion Wire Tester


The BDWS Torsion Wire Tester is a portable apparatus to allow the testing of wireline to API 9A specification

Triangular Spreader Plate


The BDWS Triangular Spreader Plate is designed and manufactured to reduce the bending stress impart from the larger wireline/ cable to the Stuffing Box/Grease Injection Head. To achieve this, the hay pulley/top block is used and suspended by the triangular spreader bar (no sheave is required on the stuffing box/grease injection head)

Wellhead Flanged Adapter


The BDWS Wellhead Flanged Adapter is manufactured from alloy steel and is designed to provide a means of connecting the wireline lubricator assembly to the wellhead

Wireline Wiper


The BDWS Wireline Wiper is generally attached to the Hay Pulley or Floor when the wireline is being retrieved from the well

CT Bulk Head


The BDWS CT Bulkhead is a pressure retaining termination point providing electrical communication for logging/steering tools when using stiff wireline

Adjustable Spring Roller Centralizer


The BDWS CT Adjustable Spring Roller Centralizer is capable of providing high centralizing loads. Loads taken by the arms are fully adjustable, to support individual toolstring configurations in deviated wells. A full through bore is incorporated allowing conveyance fluids.

CT Bow Spring Centralizer


The CT Bow Spring Centralizer can be installed at any point within the bottom hole assembly. This style of centralizer provides a centralizing force whilst passing through a range of diameters e.g. Nipples, Sleeves etc.

CT Ball Check Valve


The ball type check valve offers a safety system that ensures against reverse flow within the coiled tubing. They are obtainable with double ball if required. The spring assisted balls are also available to enable quicker response from the valve.

CT Blind Box


The CT Blind Box is available for any combination of coiled tubing and thread sizes and has circulating ports which can be positioned and angled to suit the coiled tubing operation